Clarion DRX9375R User Manual

A
Top View of
Main Unit
@ TROUBILESHOOTING
Problem
Nothing happens when
buttons are pressed.
Display is not accurate.
Microprocessor has malfunctioned
due to noise,etc.
Turn off the power,then press the DCP release button
and remove the DCP.
Press the reset button for about 2 seconds with a thin
rod.
DCP or main unit connectors are
dirty.
DSP or equalizer does Microprocessor has malfunctioned
not operate. due to noise,etc.
Mi ERROR DISPLAYS
If an error occurs,one of the following displays is displayed.
Take the measure described below to eliminate the problem.
Saas
CD ERROR2 A CD is caught inside the CD deck and is | This is a failure of CD deck's mechanism and consult
not ejected. your store of purchase.
CD ERRORS ACD cannot be played due to scratches,etc. | Replace with a non-scratched,non-warpei-disc.
Wipe the dirt off with a soft cloth moistened with clean-
ing alcohol.
Press Direct button 1 (for more than 2 seconds)while
holding in the DSP button,then turn the power back on.
CD ERROR6 A CD is loaded upside-down inside the CD | Eject the disc then reload it properly.
deck and does not play.
CDAC ERROR2 Disc inside the CD changer is not loaded. | This is a failure of CD changer's mechanism and con-
sult your store of purchase.
CDAC
ERRORS
A
CD
inside
the
CD
changer
cannot
be
|
Replace
with
a
non-scratched,non-warpei-ciisc.
played due
to
scratches,etc.
CDAC ERROR6 A CD inside the CD changer cannot be | Eject the disc then reload it properly.
played because it is loaded upside-down.
EQ ERRORQ9 Communication error between main unit | Connect the expanded DSP/EQ connectiig cable se-
and expanded DSP/EQ. curely.
{f an error display other than the ones described above appears,press the reset button.
If the problem persists,turn off the power and consult your store of purchase.
-3- DbC.9375R/RW

Clarion DRX9375R Specifications

General

Brand	Clarion
Model	DRX9375R
Category	CD Player
Language	English