Radio Mode Operations
Listening
to
the
radio
1.
Press the [SRC] button and select the radio
mode, then the radio will be on.
2.
To
select a preset band, press the [BND]
button, then select one of the preset bands
such as FM1, FM2, FM3 or AM. Every time
the [BND] button
is
pressed, the display will
change
as:
FM1
~
FM2~
FM3~
AM
~
FM1
...
3.
Press the [
1<lllII<lllII
,
~~I]
lever upward or downward
to tune
in
the desired station.
Seek
tuning
1.
Press the [BND] button and select the desired
band (FM or AM).
* If "MANU" is lit
in
the display, press and hold
the [BND] button for 1 second or longer.
"MANU"
in
the display goes off and seek tuning
is now available.
2.
Press the [
1<lllII<lllII
,
~~I
] lever upward or downward
to start automatic station tuning.
When the lever
is
pressed upward, search
will be performing
in
the direction of higher
frequencies.
When
the
lever
is
pressed
downward, search will be performed
in
the
direction of lower frequencies.
Manual
tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time.
In
the quick
tuning mode, you can quickly tune the desired
frequency.
1.
Press the [BND] button and select the desired
band (FM or AM).
*
If
"MANU"
is
not lit
in
the display, press and hold
the [BND] button for 1 second or longer.
"MANU"
is
lit
in
the display and manual tuning
is
now available.
2.
Tune into a station.
•
Quick
tuning:
Press the
[I<lllII<lllII,
~~I]
lever upward or downward
and hold
in
position for 1second or longer to begin
station tuning.
• Step
tuning:
Press the
[I<lllII<lllII
,~~I]
lever upward or downward to
perform manual tuning.
Preset
memory
function
Preset
memory
function can store up to 24
stations:
six stations for each of FM1, FM2, FM3 and AM.
Manual
memory
function
1.
Press the [BND] button, to select a band you
want to store
in
the memory.
2.
Press the
[I<lllII<lllII
,~~I
] lever to tune into a desired
station.
3.
Press and hold one of the [DIRECT] button for
2 seconds or longer to store the current station
into preset memory.
Auto
store
Auto store
is
a function for storing
up
to 6 stations
that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1.
Press the [BND] button and select the desired
band
(FM
or AM).
2.
Press and hold the
[PSI
AS]
button for 2
seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored
in
preset
memory
in
order. This function
is
useful when
searching for a desired station
in
memory.
1.
Press the [PS/AS] button.
2.
When a desired station
is
tuned
in,
press the
[PS/AS] button again to continue receiving that
station.
14 DXZ365MP
To Next Page
Loading...
Need help?
General
