CD/MP3IWMA Mode Operations
• Random play
This function allows you to play all tracks recorded
on a disc
in
a random order.
1.
Press the [ROM] button to perform random
play.
The indication "ROM" lights in the display.
• Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3IWMA disc
in
a random order.
1.
Press and hold the [ROM] button for 1 second
or longer to perform folder random play.
The indications
"ALL
..." and "ROM" light in the
display.
•
To
cancel play
1.
Press
the
operating
button
previously
selected.
Operations
Common
to
Each Mode
To
change
display
setting
1.
Press and hold the
[0]
button for 1 second
or
longer to switch to the adjustment selection
display.
2.
Press the [
1<lllI<lllI
,
~~I
] lever upward or downward
to select the
"item
name".
"CLOCK(E)"~
"SCREEN SVR"
~"MSG
INP(E)"
~
"AUTO SCROL"
~"DIMMER"
3.
Turn the [ROTARY] knob to select the
"desired
setting
value".
*
In
the case of item names appearing with the
"E" suffix, after the item name, the
[~II]
button
must be pressed to display the setting value.
* After completing settings, press the
[0]
button
to return to the previous mode.
• Setting the
clock
2-1. Select
"CLOCK
<E>".
3-1. Press the
[~II]
button.
3-2. Press the [
1<lllI<lllI
,
~~I]
lever upward or
downward to select the hour or the minute.
3-3. Turn the [ROTARY] knob to set the correct
time.
*The clock is displayed
in
12-hour format.
3-4. Press the
[~II]
button to store the time into
memory.
Note:
•
You
cannot set the clock when it
is
displayed with
only the ignition on. If you drain or remove the car's
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
•
Turning
the
screen
saver
function
on
or
off
This unit
is
provided with the screen saver function
which allows you to show various kinds of patterns
and characters
in
the operation status indication
area of the display
in
a random order.
You
can turn
on and off this function.
If
the
button
operation
is
performed
with
the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
* The factory default setting is "ON".
20 DXZ365MP
To Next Page
Loading...
