Clarion DXZ365MP User Manual

Operations Common to Each Mode
2-1. Select "SCREEN SVR".
3-1. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ROTARY] knob,
the setting changes in the following order:
SS OFF ~ SS ON ~ SS MESSAGE.
• Entering MESSAGE INFORMATION
Message up to 30 characters long can be stored
in memory and displayed as a type of screen
saver setting.
* The factory default setting is "WELCOME TO
CLARION".
2-1. Select "MSG INP <E>".
3-1. Pressthe [~II] button.
3-2. Press and hold [BND] button for 1 second or
longer to clear the old message.
3-3. Press the [ I ...... , ~~I] lever upward or
downward to move the cursor.
3-4. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following orders:
Capital letters ~ Numbers ~ Symbols ~
Capital letters...
3-5. Turn the [ROTARY] knob to select the desired
character.
3-6. Repeat step 3-3 to 3-5 to enter up to 30
characters for message.
3-7. Press and hold the [~II] button for 2 seconds
or longer to store the message in memory
and cancel input message mode.
* Press and hold the [BND] button for 1 second
or longer to cancel the input message. Then
press and hold the [ ~II ] button for 2 seconds
or longer to store the message and the mes-
sage return to default setting.
• Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3IWMA title.
* The factory default setting is "ON".
2-1 . Select "AUTO SCROL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
• ON:
To scroll automatically.
• OFF:
To scroll just 1time when the title was changed or the
[T] button was pressed for 1 second or longer.
• Dimmer control
You can setting the dimmer control "ON" or
"OFF".
* The factory default setting is "ON".
2-1. Select "DIMMER".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
To change other settings
1. Press the [ADJ] button to switch to the
adjustment selection display.
2. Press the [ I ...... ,~~I ] lever upward or down-
ward to select the "item name".
Each time the [I ...... ,~~I] lever is pressed up/
down, the item display changes in the following
order:
"BLINK LED" ~ "AMP CANCEL" ~
("SID DISP") ~ "SYS CHK(E)"
* SID DISP function only applies when a Satelite
receiver is connected.
3. Turn the [ROTARY] knob to select the "desired
setting item".
* After completing settings, press the [ADJ] but-
ton to return to the previous mode.
• Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from the
unit, this indicator blinks.
* The factory default setting is "OFF".
2-1. Select "BLINK LED".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
• Setting the external amplifier
* The factory default setting is "OFF".
2-1. Select "AMP CANCEL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
DXZ365MP 21

Clarion DXZ365MP Specifications

General

Brand	Clarion
Model	DXZ365MP
Category	Car Receiver
Language	English