CD/MP3JWMA Mode Operations
• File extensions
• Always add a file extension ".MP3" or ".WMA"
to MP3
orWMA
file
by
using single byte letters.
If you add a file extension other than specified
or forget to add the file extension, the file
cannot
be
played.
• Logical
format
(File system)
1.
When writing MP3IWMA file
on
a CD-R disc or
CD-RW disc, please select
"IS09660 level 1,2
or
JOLIET
or
Romeo" as the writing software
format. Normal play may not
be
possible if the
disc
is
recorded on another format.
2.
The
folder
name
and
file
name
can
be
displayed as the title during MP3IWMA play
but the title must be within 64 single byte
alphabetical letters and numerals (including
an
extension).
3.
Do
not affix a name to a file inside a folder
having the same name.
• Folder
structure
1.
A disc with a
folder
having more
than
8
hierarchical levels will be impossible.
• Number
of
files
or
folders
1.
Up to 255 files can
be
recognized per folder.
Up
to 512 files can
be
played.
2.
Tracks are played
in
the order that they were
recorded onto a disc. (Tracks might not always
be
played
in
the order displayed
on
the PC.)
3.
Some noise may occur depending
on
the type
of encoder software used while recording.
CD-DAlMP3JWMA selection on
multi-session
CD
1.
If
a multi-session CD which contains CD-DA
and MP3IWMA files
is
being inserted, user can
select either CD-DA or MP3IWMA files to be
played.
2.
Default
setting
for
files
to be played on
multisession CD
is
CD-DA files.
3.
Press the [BND] button for more than 1 second
will toggle between selection of CD-DA and
[MP3IWMA] files to be played.
4.
When CD-DA type is selected, display will
show
"M-SESS CD". When MP3IWMA type
is
selected, display will show "M-SESS MP3".
5.
CD-DA/MP3IWMA selection function can only
be
performed
in
CD/MP3IWMA mode.
It
will
only activate after re-insert
CD.
For example,
current setting
is
CD-DA type. Press [BND]
button for more than 1second
to
set MP3IWMA
type. User has to eject CD and re-insert again
as to play MP3IWMA files.
6.
Types of recording that can be played are as
follows.
~g
Set
to
CD
Set
to
MP3IWMA
Mixed with CD
Play CD
Play
MP3/wMA
and
MP3/wMA
type tracks
CD type track only
Play CD
Play CD
MP3/wMA
type
Play MP3/
Play
MP3/wMA
track only
WMA
7.
When a mixed mode CD
is
loaded and
CD
is
set, the track to be played first
is
MP3IWMA
file data and no sound
is
heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to
MP3/wMA
type, the CD cannot be played normally
in
some
cases.
Disc-In-Play
function
As long
as
the ignition key
is
turned to the
ON
or ACC position, this function allows you to turn
the power to the unit and start playing the disc
automatically when the disc
is
inserted even if the
power
is
not turned on.
• Do
not
try
to
put
your
hand
or
fingers
in
the
disc
insertion
slot.
Also
never
insert
foreign
objects
into
the
slot.
• Do
not
insert
discs
where adhesive
comes
out
from cellophane tape
or
a rental CD label,
or
discs
with
marks
where cellophane tape
or
rental CD labels were removed. It may be
impossible
to
extract these
discs
from
the
unit
and they may cause the
unit
to
break
down.
Backup eject
function
Just pressing the [
.]
button ejects the disc even
if the power to the unit was not turned on.
16 DXZ365MP
To Next Page
Loading...
Need help?
General
