The control panel can be detached to prevent
theft. When detaching the control panel, store
it
in
the DCP (Detachable Control Panel) case to
prevent scratches.
We
recommend taking the DCP with you when
leaving the car.
Removing
the
DCP
1.
Press the [SRC] button for 1 second or longer
to switch off the power.
-POWER
I~I
2.
Press
in
the [OPEN] button.
*
Jf
the flip down panel does not open
fully,
gently
open it with your hand.
[OPEN] button
3.
Pull the DCP toward you and remove
it.
4.
Close the HOLD
FLAP.
HOLD
Be sure
to
close
the
HOLD FLAP
for
safety
when removing
the
DCP.
Attaching
the
DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP to attach into
the main unit.
• The DCP can easily be damaged
by
shocks.
After removing it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• If the FLIP DOWN PANEL
is
kept open,
the
DCP may
drop
due
to
vibration
of
the
car.
This
result
in
damage
to
the
DCP.
So
close
the FLIP DOWN PANEL
or
remove
the
DCP
to
store
into
the
case.
• The
connector
connecting
the main
unit
and
the DCP
is
an extremely
important
part. Be
careful
not
to
damage
it
by
pressing
on
it
with
fingernails, pens, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft,
dry
cloth only.
DXZ365MP 9
To Next Page
Loading...
Need help?
General
