• The
DCP
can easily be damaged
by
shocks. After removing it, be careful notto
drop
it
or
subject
it
to strong shocks.
• When the [RELEASE] button is pressed
and the
DCP
is unlocked, the car's
vibrations may cause
it
to
fall. To prevent
damage to the
DCP,
always store
it
in its
case after detaching it. (See figure below.)
• The connector connecting the main unit
and the
DCP
is
an extremely important
part. Be careful not
to
damage
it
by
pressing on
it
with fingernails, pens,
screwdrivers, etc.
Storing the DCP
in
the DCP Case
Hold the DCP,
in
the orientation as shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is
in
the correct
orientation.)
*The DCP is unlocked
4. DCP
3. Remove the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case·to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Removing the DCP
1. Press the [SRC] button for 1 second or
longer to switch off the power.
2.
Press
in
the [RELEASE] button.
~
[RELEASE] button
~~
.
r)~
Note:
•
If
the
DCP
is dirty, wipe
off
the
dirt
with a soft,
dry
cloth only.
6 DXZ275MP
/DXZ375MP
To Next Page
Loading...
Need help?
General
