Satellite Radio Operations
Preset memory
1.
Press the [BND] button to select the desired
band.
2.
Select the desired channel with quick tuning
or step tuning.
3.
Press and hold the [DIRECT] button for 2
second or longer to store the current channel
into preset memory.
Receiving stations selected
by
category
Satellite Radio allows you to select broadcast
channel category (contents).
1.
Press and hold the [BND] button for 1
second or longer to select the category
selection mode.
*It press once again, return to the channel
. selection mode.
2.
Press the [
...
]
or
[T]
button to change the
category item.
3.
Press the [
.....
~]
or
[~~]
button to tune
in
a
station.
Note:
• When the
category
selection
mode
is entered, the
category
of
the
last
received
channel
is displayed
first.
• The
category
selection
mode
is
canceled
when
no
channel
with the
selected
category can
be
found.
• The
~l
or
~~l
button
are
not
pressed
within 7
seconds, the
category
selection
mode
is
canceled,
and
resumes to the
channel
mode.
Presetting a category
A category can be preset by registering specific
categories
in
[DIRECT] buttons 1 to
6.
Then the
desired category can be recalled by pressing
the corresponding
[DIRECT] button.
1.
Press and hold the [BND] button for 1
second or longer to enter the category mode.
2.
Press the [
...
]
or
[T]
button to select a
category.
3.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
category into preset memory.
Notes:
• When the
name
of
a
channel
stored
in
memory
is
changed
by
a broadcasting channel, the
display
may
show
a
channel
name
that differs from the
stored
name.
• A
channel
stored
in
memory
may
be
discontinued
at
the option
of
the broadcasting channel.
•
If
no
operation is
performed
for
more
than 1
second,
category
seek
tuning
can
automatically
tune in
a receivable.
broadcast
channel
category.
Scan function
There are two scan modes: the category scan
mode and the preset scan mode.
During scanning channels are displayed
in
abbreviated form, the display mode cannot be
switched.
• Category scanning
In
a category scan, broadcast channels
in
the
same category as the current channel are
selected about every 10 seconds.
1.
Press and hold the [BND] button for 1
second or longer to select the channel mode.
2.
Press the
[rNI~]
button to select the category
scan mode. And start the category scanning.
Note:
•
Category
scanning
is
not
available when
no
category
is
defined
for the
current
channel.
• Preset scan
A preset scan scans the channels (up to 18
channels) stored
in
the preset memory about
every 10 seconds.
1.
Press and hold the [BND] button for 1
second or longer to select the channel mode.
2.
Press and hold the
[rNI~]
button for 1 second
or longer to select the preset scan mode.
And start the preset scanning.
DXZ275MP
/DXZ375MP
25
To Next Page
Loading...
Need help?
General
