Clarion EQS755 - Using Front Panel 3.5 mm Input; Care and Maintenance; Installation and Wiring; What is Included

Notes(A):
1.
With
AUX
S
I W button in
out
position
you
can
select
either
Hi
Input
or
Main in.
1.
1
Do
not
use
Hi
Input
and
Main
at
same
time; doing that
it
will cause mixing sounds,
causing too
much
distortion in the audio.
2.
With
AUX
S
I W button in position
you
can select the
AUXIN
function.
Using the
front
panel
3.5mm
input
1. Reduce the EQS755's volume to minimum before plugging the 3.5mm cable to avoid
any sudden, unwanted changes in output.
2. Plug the 3.5mm cable into the
EQS755AUX
input. The
EQS755 will
automatically
select this input
wtten
the cable in inserted.
3. Turn the
EQS755
master volume to a normal listening level.
4.
To
go
back to the main input, simply reduce the master volume and gently unplug the
3.5mm cable from the
EQS755.
Note:
Unplugging the source device will
not
change inputs.
You
must
remove the
cable from the
EQS755
Care and maintenance
Cleaning the
cabinet
Use a soft,
dry
cloth to gently wipe dust and dirt from the unit.
Do not use benzene, thinner,
car
cleaner,
or
other cleaners. These substances
may
damage the unit
or
cause the paint to peel.
Servicing
the equalizer/crossover
unit
In the event that trouble arises, never open the case
or
disassemble the unit. The internal
parts are not serviceable
by
the user. Opening any components
will
void the warranty.
A
CAUTION
Changes
or
modifications
to
this
product
that
are
not
approved
by
the
manufacturer
will
void
the
warranty
and
will
violate FCC approval.
5.
INSTALLATION
AND
WIRING
Read these instructions and the
following
precautions
carefully.
What is included in the
box
In
addition to this manual, the box contains:
• EQS755
7 -band graphic equalizer
•
2 mounting brackets
•
8 Phillips-head screws
EQS755
7