EasyManua.ls Logo

Clarion VRX785BT - Ejecting a Disc

Clarion VRX785BT
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting/Ejecting a Disc
22
VRX785BT
English
Owner’s manual
On Discs
Exercise a good precaution when loading a
disc with the panel open.
Never turn off the power and remove the unit
from the car with a disc loaded.
CAUTION
CAUTION
With the liquid crystal panel open, a driver
may not be able to see the disc insertion slot.
For your safety, insert a disc with the screen
closed.
Even when the liquid crystal panel is closed,
however, the recessed disc slot may be
difficult for a driver to see, care is needed
whenever inserting discs.
Setting a disc
1. Insert a disc into the center of the insertion
slot with the label side facing up.
The disc will automatically be drawn into the
DVD player.
After setting a disc
The system will automatically be switched to the
relevant source media mode according to the
disc, and start playing back the disc.
When a DVD video disc is set:
The system is switched to the DVD Video mode.
See “DVD Video Operations” (page 29).
When an Audio CD is set:
The system is switched to the CDDA mode. See
“Audio CD Operations” (page 35).
When a CD/DVD with MP3/WMA/AAC/DivX
files is set:
The system is switched to the MP3/WMA/AAC
mode or DivX mode according to the Playform
setting. See “MP3/WMA/AAC Operations”
(page 37) or “DivX Operations” (page 40).
Note:
Never insert foreign objects into the disc insertion
slot.
If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
8 cm (single play) discs cannot be used.
CAUTION
For your safety, the driver should not insert
or eject a disc while driving.
Ejecting a disc
1. Press the [o] (EJECT) button to eject the
disc.
The screen changes to the DVD mode
screen, and “EJECT” appears.
If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload).
2. Remove the disc carefully.
Note:
If you force a disc into the insertion slot before auto
reloading, this can damage the disc.
No/Non
280QC6827BA-VRX785BT_EN.book Page 22 Wednesday, January 23, 2008 10:57 PM

Table of Contents

Related product manuals