Clark C300 40 - Before Operation Checks (Starting System); Choke Operation for Cold Starts; Ignition Switch and Starter Operation; Engine Flooding Procedure

Before Operation
1. Each shift operator
must complete an oper-
ator's daily check list at
the beginning of his
shift.
These daily check lists
are available from your
Clark dealer.
3. Check condition of
drive wheels and tires.
Note any apparent drive
wheel or tire damage on
the check list.
2. Walk around truck
and visually check for
damage and leaks.
Note all damage and
leaks on check list.
4. Check condition of
steer wheels and tires.
Note any apparent steer
wheel or tire damage on
the check list.
Page 16
Code:Ol-345. REV May 84