Clark C300 40 - Truck Tip-Over Safety (Protective Positioning); Correct Operator Positioning During Tip-Over

Operating Hints
5. Always be alert for
abrupt changes in the
operating characteristics
of your truck.
Unusual noises or
sudden changes should
be reported to your
supervisor immediately.
6. All adjustments
and/or repairs should be
performed by thor-
oughly trained and qual-
ified personnel only.
13160
7. All these truck models (except L.P. gas) are equipped with a reserve fuel supply.
If main fuel supply runs low, turn valve lever (accessible through step hole in left
side of frame) from "Run" (main) to "Em" (auxiliary) position. This will provide
about 1/2 gallon of additional fuel to return you to your refueling area.
Remember to return the reserve fuel supply lever to the "Run" position after
refueling has been accomplished.
Code: OI-345 Jul 74 Page 31