Clark C300 40 - Jump Starting Procedures (Starting and Removal); Grounding Connections for Second Cable; Starting the Discharged Battery Truck; Jumper Cable Removal Sequence

Parking
1. Park lift trucks only
in designated parking
areas.
Do not block aisles,
exits, entrances or other
emergency lanes.
3. Lower lift forks to
floor.
2. Make sure that trans-
m i ssion directional
selector lever is in
neutral and that park-
ing brake lever has been
properly applied.
4. Tilt upright forward
until fork tips rest on
the floor.
Page 34
Code: OI-345, REV. May 84