Clark C500 100 - Operating The Hydratork Transmission

Know Your Truck
The main hydraulic functions (lifting,
lowering and tilting) are controlled by
levers conveniently located to permit
operation by the operator's right hand.
THE LEVERS WILL AUTOMAT-
ICALLY RETURN TO NEUTRAL
WHEN RELEASED.
Trucks equipped with hydraulic
attachments or accessories will have one
or two additional control levers mounted
on the right hand side of the dash. The
function of these lever(s) should be
checked with the proper authority.
BE COMPLETELY FAMILIAR WITH
ALL HYDRAULIC FUNCTIONS
BEFORE OPERATING THE TRUCK
WITH A LOAD. LEARN TO PERFORM
THESE FUNCTIONS IN A SMOOTH
MANNER.
FWD. TILT
13292M
Page 22 HYDRAULIC CONTROLS
Code: OI-335 Oct. 73