Clark C500 100 - Wheel and Tire Inspection

Helpful Hints
QUICK-DISCONNECT
COUPLING
13250M
To Exchange L.P. Gas Tanks —
1. Close container valve by turning to the right
(clockwise).
2. Operate engine until it stops. All gas vapors
between tank and carburetor should now be
burned. Turn key switch off.
3. Disconnect fuel line at quick-disconnect coup-
ling. Tools should not be required to connect
or disconnect coupling.
4. Loosen container fasteners . . . swing and lift
up container mounting cover . . . remove
container.
5. Replace with recharged container by reversing
above procedure. Make sure that tank locating
hole is secured over the positioning pin in
the tank cover.
6. Open tank valve slowly to ensure that auto-
matic safety check valve does not cut off fuel
supply. See Page 36.
TANK POSITIONING-PIN 13251M
Page 42
Code: OI-335 Oct. 73