SUMMARY
OF
SAFE OPERATING PROCEDURES
(Continued)
19.
Make sure your truck
is the
correct fire
safety
type
for the
area
in
which
you are
working.
The
correct type
designation
for
the truck is on the nameplate. In hazardous
areas,
use
only trucks approved
for use in
those areas.
Hazardous
areas have
classification markings.
20.
When attachments
are
used, extra care
must
be
taken
in
securing,
positioning,
and
transporting
the
load. Operate trucks
equipped with attachments
as
partially
loaded trucks. Handle only
loads
within
the
capacity
of the
truck
and
attachment.
Check
the
capacity plate
for
weight infor-
mation.
21.
If the
upright
malfunctions
or
becomes
stuck
in a
raised position, operate
the
lift
control
to
eliminate
any
slack lift chains.
Do
not go
under
the
forks
or
carriage
to
make
repairs.
22.
Only specifically authorized
and
qualified
persons should make repairs
and
adjustments
to the
truck.
23.
Report
all
accidents involving person-
nel, building structures,
and
equipment
to
the
correct authority.
24.
Before getting
off
truck, neutralize
travel
control,
fully lower lifting mechanism
and
set
parking brake. When leaving truck
unattended, also shut
off
power.
Code:
OI-335,
REV. Apr.
84
PageS
To Next Page
Loading...
