GEX,GTX Operator Compartment 4-11
Section 4. Operator Compartment and Controls
Down arrow button (Mode button)
:
Pressing this button
in normal operating condition, it will move to Menu mode.
Up arrow button (Enter button)
:
Pressing this button, it
will move to upper menu.
Left arrow button (Slow speed button) : In normal
operating condition, it will select/release Slow speed.
−When pressing, the following figure will be displayed and Slow
speed selected.
− Press once more to release.
− The figure will be disappeared and Slow speed released.
− Chang of slow speed
Use "+/-" buttons to change the set speed while the Slow speed is
selected. After adjusting the speed, press "Enter" (Up arrow) button to
store it.
The speed can be set from 2 km/h to 9km/h with unit of 1km/h.
Right arrow button (Power selection button): In
normal operating condition, it will select/release Power.
−Power mode is composed of 3 steps, and it can be adjusted by
use of "+/-" buttons. After adjusting the speed, press "Enter" (Up
arrow) button to store it.
− Power mode
In the order of Economy → Normal → Power; Pressing "+" button to
move right, and "-" left.
•
Economy: It is Slow speed mode to save the battery consumption
as minimizing the acceleration function.
•
Normal: It is normal operating mode, and smooth acceleration can
be done.
•
Power: Powerful acceleration is possible and the work ability will be
improved.
Plus(+) button: Increase the data as set value in the
current Menu mode.
Minus(-) button : Decrease the data as set value in the
current Menu mode.
To Next Page
Loading...
