To Next PageTo Next Page
Need help?Do you have a question about the Clark GTX 20s and is the answer not in the manual?
Outlines the procedure for inspecting the truck at the start of each shift.
Emphasizes the importance of using seat belts and how to buckle them.
Warns against hazards associated with forks, like walking under them.
Highlights hazardous pinch points and warns against using the upright as a ladder.
Explains the causes and types of lateral and longitudinal tip-overs.
Provides instructions on how to react if the truck begins to tip over.
Details the correct procedure for safely parking the lift truck.
Warns about dangers of loose or unbalanced loads and how to handle them.
Highlights hazards related to overhead clearance, turning, and load height.
Addresses hazards associated with docks, drop-offs, and trailer safety.
Describes various controls like key switch, seat adjustment, and parking brake.
Lists essential checks and preparations before starting lift truck operation.
Outlines the steps for safely starting the lift truck.
Reinforces the importance of wearing and correctly fastening the seat belt.
Provides a table of diagnostic codes and their corrective actions.
Provides general safety guidelines for operating the lift truck.
Covers safe load handling principles, capacity, and stability.
Provides guidelines for safe travel with various types of loads.
Details the procedure for picking up and moving loads.
Explains the correct procedure for safely depositing loads.
Guides on the correct procedure for stacking loads.
Details the process for retrieving loads from a stack.
Outlines the steps for leaving the truck in a safe condition.
Stresses the operator's responsibility for pre-use truck inspection.
Lists specific visual checks to perform on the truck's components.
Details operational checks for controls, systems, and safety equipment.
Lists essential safety warnings and precautions before towing a disabled truck.
Provides step-by-step instructions for safely towing a lift truck.
Emphasizes the importance of maintenance for safety and truck life.
Lists daily checks and their corresponding PM intervals (A-E).
Provides guidelines for performing maintenance safely and correctly.
Covers safety precautions and procedures for battery charging.
General
