Display 3-15
Section 3. Operator Compartment and Controls
Engine Check Lamp
When the engine has problem, this LED will be on.
Contact your CLARK dealer.
Glow Plug Preheat (Diesel Truck)
Turn the starter key to "ON" position.
The indicator light will illuminate indicating that an
electrical operated glow wire is heating the air in the
induction manifold. After the light goes out, you may
start the engine. If the engine fails to start, turn the
key switch to "ON" and wait for 30 seconds before
turning it to start.
Smart Interlock Icon (optional)
Operating sitting on the seat shall wear the seat belt.
See page 3-33 for further information.
Speed Limit Function Icon (optional)
The icon indicates that the max. speed limit function
of the forklift truck is activated.
You can set ON/OFF and limit speed on the service
menu mode. A password is required, contact your
dealer.
• Setup path: Service Menu Mode,
SETUP SPEED SETUP
To Next Page
Loading...
