Clark S20 D - Page 61

Display 3-23
Section 3. Operator Compartment and Controls
Display Setup
Used to set options relevant to
operation of the forklift truck.
A password is required, contact your
dealer.
• Selecting operation hours and
mileage
• Selecting display language
(23 different languages)
• Setting vendor contact information marking
• Speed display ON/OFF
Hour Setup
Used to set operation hours and
maintenance hours of the forklift
truck. A password is required, contact
your dealer.
• Setup path: Service Menu Mode,
SETUP  HOUR SETUP
(1) Operating hour
Operation hours are set based on the engine operation of the forklift
truck.
(2) KEY ON hour
Setting key On hours of the forklift truck.
A password is required, contact your dealer.
(3) Setting total operation hours
NOTICE
Make use of Plus (+) buttons to increase the
values. (Pressing the button for one seconds
or longer rapidly increases the value.)
99999.9 is the max. value, and it is not
allowed to change 99999.9 to 00000.0.
DISPLAY SETUP
DISPLAY MODE
LANGUAGE
DRIVER MONITER
DRIVER ALARMLOG
DEALER INFORMATION
HOUR
ENG
OFF
OFF
OFF
HOUR SETUP
OPERATING HOUR
KEY ON HOUR
ENGINE HOUR
MAINTERNANCE TIME
12345.6
12345.6
12345.6
500