3-22 Display
(9) Tilt Limit Warning Setup (only Korea option)
Used to set the mast tilt angle limit alarm.
• ON function / OFF function
Lamp Setup
• Setup path: Service Menu Mode, SETUP LIGHT CONTROL
(1) Front or Rear Work Lamp Setup
Used to set operation of the front and
the rear work lamps. A password is
required, contact your dealer.
• Key setting: Lamp is turned on
when operating the key switch.
• Button setting: Lamp is turned on
when operating the mode selection
button on the instrument panel.
• Reverse Setting: Rear Work Lamp
only, activated when directional
lever placed in reverse.
(2) Strobe Light Setup
Used to set operation of the strobe light. A password is required,
contact your dealer.
• Key setting: Lamp is turned on when operating the key switch.
• Button setting: Lamp is turned on when operating the mode selec-
tion button on the instrument panel.
(3) Light Auto Timer
When the Seat switch opens during key-on (engine stopped) with
Function setup turned on, lamps are automatically turned off when
the set time has elapsed. A password is required, contact your
dealer.
• OFF/Setting up to 10 minutes by one-minute increment
Front Wowk
Lamp button
Rear Work
Lamp button
Strobe Light
button
To Next Page
Loading...
