Clark S20 D - Page 59

Display 3-21
Section 3. Operator Compartment and Controls
(4) Seat belt alarm setup
Used to set the seat belt warning
function.
• Function of displaying message
only / Message displaying + buzzer
sounding function / Message
displaying + horn sounding function
NOTICE
See page 3-33 "Seat Belt Warning" for further information.
(5) Smart Interlock Setup (optional)
Used to set the smart interlock function.
• OFF function / Function of displaying message only / Message
displaying + buzzer sounding function / Message displaying + horn
sounding function
(6) Smart Interlock Time Setup
When the hours set on the smart interlock setup conditions have
elapsed, the buzzer sounds.
• Select and set value from "0, 5, 10, and 20 seconds."
(7) Engine Shutdown Setup
Used to set the engine shutdown
function. When the engine is
shutdown all lights are turned off.
• OFF function / Buzzer sounding
function / Horn sounding function /
Shutdown
(8) Traveling alarm setup
Used to set the traveling alarm function.
• OFF function / Forward alarm / Backward alarm / Forward &
backward alarm
SEAT BELT
SEAT BELT REMINDER
SMART INTERLOCK
SMART INTERLOCK TIME
HORN
OFF
5
ALARM CONTROL
SEAT
SEAT BELT
ENGINE SHOTDOWN
TRAVEL ALARM
TILT LIMIT WARNING
HORN
REV
OFF