3-20 Display
(5) Error code
In the drive menu mode, only error codes are displayed, and error
codes can be deleted.
In the service menu mode, you can delete error codes after entering
the password. Contact your dealer, regarding your password.
Alarm Setup
Alarm can be set in service menu mode only. (Not set on the driver
menu mode) A password is required, contact your dealer.
• Setup path: Service Menu Mode, SETUP ALARM CONTROL
(1) Seat (Driver's seat) Warning Setup
Used to set alarm when the seat
switch is kept turned off for two
seconds or longer during operation.
• Function of displaying message
only / Message displaying + buzzer
sounding function / Message
displaying + horn sounding function
See page 3-33 "Seat Warning" for further information.
(2) Seat Shutdown Setup
When the seat switch is OFF for a period longer than Seat Shutdown
Time setting while the engine is running, a function for stopping the
engine can be set.
• OFF function / Function of displaying message only / Message
displaying + buzzer sounding function / Message displaying + horn
sounding function
(3) Seat Shutdown Time Setup
When the seat switch is OFF for a period longer than this setting
while the engine is running, the engine stops preventing fuel
consumption . The value can be set between one and ten minutes.
SEAT
SEAT WARNING
SEAT SHUTDOWN
SEAT SHUTDOWN TIME
MESSAGE
OFF
1
To Next Page
Loading...
