2
3.2.5 Exhaust System 33
3.3 LUBRICATION SYSTEM 34
3.3.1 Checking Sump Oil 34
3.3.2 Changing Engine Oil 34
3.3.3 Changing Oil Filter Cartridge 34
3.3.4 Oil Specification 35
3.3.5 Oil Capacities 35
3.4 COOLING SYSTEM 35
3.4.1 Intended Engine Operating Temperature 35
3.4.2 Engine Coolant 35
3.4.3 Water 35
3.4.4 Coolant Capacities 35
3.4.5 Coolant Inhibitors 36
3.4.6 Procedure for Filling Engine 36
3.4.7 Providing Adequate Raw Water Supply to the Engine Heat Exchanger 37
3.4.7.1 Raw Water Supply 37
3.4.7.2 Cooling Loop 37
3.4.7.3 Setting Raw Water Flow Rate 38
3.4.7.4 Raw Water Outlet 38
3.4.7.5 Raw Water Quality Strainers and Deterioration of Heat Exchanger (CAC) 39
3.4.7.6 Backflow Preventers 39
3.4.7.7 Raw Water Outlet Temperature 39
3.4.8 Flow Paths of Engine Cooling System 39
3.4.9 Important Service Notice 41
3.4.9.1 Water Pump Cavitation 41
3.5 ELECTRICAL SYSTEM 41
3.5.1 Wiring Diagrams 41
3.5.2 Checking Drive Belt Tension and Adjustment 42
3.5.3 Engine Overspeed 42
3.5.4 Field Simulation of Pump Controller Alarms 42
3.5.5 Battery Requirements 43
3.6 ENGINE SPEED ADJUSTMENT 43
4.0 MAINTENANCE SCHEDULE 43
4.1 ROUTINE MAINTENANCE 43
5.0 TROUBLE SHOOTING 44
5.1 DIAGNOSTIC TROUBLE CODES 44
6.0 PARTS INFORMATION 46
6.1 SPARE PARTS 46
6.2 ENGINE MAINTENANCE PARTS LIST 46
7.0 OWNER ASSISTANCE 46
To Next Page
Loading...
