14
3. Pull the starter recoil rope slowly 2 or 3 times so that the oil is deposited on
the cylinder walls before replacing the spark plug.
4. Finally, wipe the pump clean with a cloth and store in a dry place
protected from the weather.
In the event that a situation occurs requiring the dismantling and overhaul of
the machine, contact your CLARKE International Service Department on
020 8988 7400.
TECHNICAL SPECIFICATION
erutaeF noitacificepS
thgieWgk5.91
mm)hxwxl(snoisnemiD034x053x874
yrevileDdetaRm61(mpL952
3
)h/
daeHxaMm91
daeHnoitcuSxaMm8
rewoPdnuoSdeetnarauGm1@)A(Bd89
noitacifissalCretaWselcitrapllams/naelC
eziStel
tuOmm04
snoitacificepSenignE
epyTekorts-4/rednilycelgniS
tnemecalpsiD)rednilycelgnis(cc78
noitarugifnocevlaVnevirdr
aeg/VHO
rewoPenignEmpr006,3@PH4.2
epyt/yticapacliO )detacirbulhsalps(03/W01EAS/L4.0
yticapaCknaTleuFL6.1
epy
T/noitpmusnoCleuF )lortepdedaelnu(hwk/g2.393
epytgulpkrapSCT6E
dohtemnoitingIICT/otengaM
Please note that the details and specifications contained herein, are correct at the
time of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.