Need help?Do you have a question about the Clarke MIG130EN and is the answer not in the manual?
Assess potential electromagnetic problems in the surrounding area before installation.
Techniques for minimizing emissions and interference from the welding equipment.
General safety measures for operating welding equipment.
Protective measures against burns from welding processes.
Preventing health risks from welding fumes and vapours.
Measures to prevent fires and explosions during welding operations.
Protective measures for eyes, skin, and clothing during arc welding.
Ensuring the safety of others in the vicinity of welding operations.
Measures to prevent electric shock, including earthing and equipment checks.
Specific safety guidelines for operating MIG welding machines.
Explanation of the Metal Inert Gas welding process and its components.
Information on using the 'EN' models with or without shielding gas.
Advantages and benefits of using the MIG welding technique.
Specific electrical connection instructions for models 110E, 110EN, 130EN, 135TE.
Specific electrical connection instructions for models 151TE and 160EN.
Wiring colour codes, terminal identification, and extension cable use.
List of components included with the welder for checking.
Instructions for assembling loose components and initial setup.
Instructions for assembling the welding shield and its components.
Step-by-step guide for loading and installing the welding wire spool.
Instructions for connecting the gas bottle and regulator.
Available welding gases, tips, and regulators with part numbers.
Electrical connection details for 'No-Gas' welding on EN models.
Instructions for setting up welding gas for relevant models.
Description and settings for control switches and knobs on specific models.
Description and settings for control switches and knobs on specific models.
Recommended starting points for wire speed and adjustments for different materials.
Step-by-step guide on how to operate the welder during the welding process.
Practical advice and best practices for achieving quality welds.
Instructions for routine maintenance and inspection of the welder.
Care and cleaning procedures for the welding shield and its components.
Reference tables for recommended control settings for different materials and wire sizes.
Reference tables for recommended control settings for different materials and wire sizes.
Technical details and performance characteristics for all MIG welder models.
Electrical schematics for MIG 110E and 110EN models.
Electrical schematics for MIG 130EN and 135TE models.
Electrical schematics for MIG 151TE and 160EN models.
Detailed list of parts and their corresponding part numbers for the MIG 110E.
Visual representation of MIG 110E components with numerical labels.
Detailed list of parts and their corresponding part numbers for the MIG 110EN.
Visual representation of MIG 110EN components with numerical labels.
Detailed list of parts and their corresponding part numbers for the MIG 130EN.
Visual representation of MIG 130EN components with numerical labels.
Detailed list of parts and their corresponding part numbers for the MIG 135TE.
Visual representation of MIG 135TE components with numerical labels.
Detailed list of parts and their corresponding part numbers for the MIG 151TE.
Visual representation of MIG 151TE components with numerical labels.
Detailed list of parts and their corresponding part numbers for the MIG 160EN.
Visual representation of MIG 160EN components with numerical labels.
Available welding wire spools with part numbers for different materials.
Available welding gases, tips, and regulators with part numbers.
General| Input Voltage | 230V |
|---|---|
| Max Output Current | 130A |
| Wire Diameter | 0.6 - 0.8 mm |
| Input Current | 16A |
| Duty Cycle (10%) | 130 A |
| Protection | IP21S |
| Input Frequency | 50/60Hz |
| No-Load Voltage | 48 V |
| Welding Current Range | 130 A |
| Wire Feed Speed | m/min |
To Next Page