Need help?Do you have a question about the Clarke Weld MIG 130 TE and is the answer not in the manual?
General| Type | MIG Welder |
|---|---|
| Input Voltage | 230V |
| Welding Current Range | 30-130A |
| Duty Cycle at 130A | 10% |
| Duty Cycle | 60% at 60A |
| Wire Size | 0.6-0.8 mm |
Introduction to the MIG 130 TE and MIG 150 TE welders, covering their operation.
Defines the duty cycle of the welders and provides an example calculation.
Specifications for welding steel with 0.6mm and 0.8mm wires, including settings.
Specifications for welding aluminium with 0.8mm wire, including settings.
To Next Page