Need help?Do you have a question about the Clarke Weld MIG 150 TE and is the answer not in the manual?
General| Brand | Clarke |
|---|---|
| Model | Weld MIG 150 TE |
| Category | Welding System |
| Language | English |
Overview of Clarke air compressors, including air tools and spray guns.
Details on Clarke generators for prime duty or emergency standby use.
Information on Clarke hot and cold power washers, electric and engine driven.
Clarke welders including Mig, Arc, Tig, and Spot from DIY to industrial.
Clarke metalworking equipment such as drills, grinders, and saws for professional use.
Clarke woodworking tools including saws, sanders, lathes, and dust extractors.
Clarke hydraulics like cranes and transmission jacks for workshop use.
Clarke water pumps, submersible, electric and engine driven for various applications.
Clarke power tools such as angle grinders, cordless drills, saws, and sanders.
Clarke starter/chargers for car and commercial vehicle use.
Operating and maintenance instructions for the MIG 130 TE Turbo model.
Operating and maintenance instructions for the MIG 150 TE Turbo model.
Details the 12-month guarantee against manufacturing faults and conditions for validity.
Illustrates various types of welding joints like butt, V, bevel, and corner joints.
Explains using an Edge Setter for lap joints in thin sheet auto bodywork.
Lists common MIG welder issues, their causes, and remedies.
Essential safety rules to follow before and during MIG welder operation.
Explains the Metal Inert Gas welding process, arc, wire feed, and shielding gas.
Lists advantages of MIG welding like speed, efficiency, and reduced post-weld cleaning.
Provides the electrical wiring diagram for the MIG welders.
A detailed list of all available spare parts with item numbers and codes.
Specifications for primary and secondary power data for both models.
Clarifies the meaning of the 60% duty cycle rating for the welders.
Lists recommended wire sizes and gas types for MIG welding.
Instructions for connecting the mains lead and the correct fuse rating.
Detailed steps for assembling wheels, handle, and face shield.
Step-by-step guide to attaching the gas bottle and regulator.
Instructions for replacing the wire liner in the torch and hose assembly.
Lists consumables and accessories available from dealers and Clarke.
Contact details for parts and service departments at Clarke International.
Information on obtaining replacement welding wire and gas bottles.
Practical tips for better welding results, like gun angle and cleanliness.
How to perform spot welding using the MIG welder.
Guide on connecting the wire feed system for operation.
Explains two common welding torch/gun movement techniques.
Instructions for replacing the welding wire spool on the machine.
Safety instructions to follow before starting welding operations.
Guide on setting voltage and wire feed speed for different metal thicknesses.
Steps for preparing the machine and workpiece before welding.
How to select current positions based on metal thickness.
Chart detailing settings for steel wire of 0.6mm and 0.8mm.
Chart detailing settings for aluminium wire of 0.8mm.
To Next Page