To Next PageTo Next Page
Need help?Do you have a question about the Clarke Fluxcore/MIG 135sg WE6441 and is the answer not in the manual?
General| Type | Fluxcore/MIG |
|---|---|
| Input Voltage | 230V |
| Wire Diameter | 0.6-0.9 mm |
| Cooling | Fan Cooled |
| Wire Size | 0.6-0.8mm |
| Wire Feed Speed | 12 m/min |
| Output Amperage | 30-135 A |
Details the limited warranty coverage for manufacturing defects and the repair process.
Guidelines for operating the welder safely and understanding potential hazards.
Instructions and warnings regarding electrical shock risks during operation.
Protecting eyes and skin from arc rays and flash hazards.
Warnings and precautions to prevent fires and explosions during welding.
Risks associated with welding fumes, gases, and vapors and mitigation.
Hazards of improper handling of compressed gas cylinders and regulators.
References to relevant safety standards for welding and cutting.
Requirements and safety precautions for connecting the welder to a power source.
How to properly adjust wire speed for optimal welding performance.
