2
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INTRODUCTION
Thank you for purchasing this CLARKE compressor which is designed to supply
compressed air to air powered tools for a wide range of applications such as
spraying, sanding, drilling, and cutting.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safe operation
of the compressor.
DATA TABLE
This manual covers the following machines
Manufacturer: Clarke International
Type of Machine: Electric Compressor
Machine Model:
Rated Load:
Measured Distance:
Major Dimensions (m)
Sound pressure:
Mean Value (dB LAeq)
A Weighted Sound Power Level:
Calculated Sound Power Level
K=
Declared Single-Number Noise
Weight
SE15 100 PSI 1m 1.28 x 0.40 x 0.81 82 96.5 2.5 dB 99 66 kg
PE15 100 PSI 1m 0.95 x 0.4 x 0.75 84 97.5 2.5 db 100 58 kg
PE16 100 PSI 1m 0.95 x 0.4 x 0.85 80 93.5 2.5 db 96 70 kg
PEH15 100 PSI 1m 1 x 0.46 x 0.86 84 97.5 2.5 db 100 64 kg
PEH16 100 PSI 1m 1 x 0.46 x 0.86 80 93.5 2.5 db 96 76 kg
SE18 100 PSI 1m 1.42 x 0.45 x 0.945 83 98.1 2.5 db 101 102 kg
SE19 100 PSI 1m 1.42 x 0.45 x 0.93 80 96.5 2.5 db 99 89 kg
SE25 100 PSI 1m 1.42 x 0.45 x 1 82 97 2.5 db 100 117 kg
SE26 100 PSI 1m 1.42 x 0.45 x 0.99 81 95.5 2.5 db 98 133 kg
SE29 100 PSI 1m 1.54 x 0.52 x 0.96 87 101.5 2.5 db 104 139 kg
SE36 100 PSI 1m 1.54 x 0.52 x 1.14 83 98 2.5 db 101 140 kg
SE37 100 PSI 1m 1.54 x 0.52 x 1.05 86 101 2.5 db 104 153 kg
SE46 100 PSI 1m 1.54 x 0.52 x 1.2 89 104 2.5 db 107 187 kg
To Next Page
Loading...
Need help?
General
