Clarke RANGER 24 User Manual

OPERATION & MAINTENANCE
INSTRUCTIONS
©
RANGER 24 OIL FREE
AIR COMPRESSOR
0907
RANGER 24 OIL FREE
AIR COMPRESSOR

Clarke RANGER 24 Specifications

General

Model	RANGER 24
Power Source	Electric
Voltage	230V
Air Displacement	24 liters/min
Maximum Pressure	8 bar
Tank Capacity	24 Litres
Free Air Delivery	24 liters/min

Summary

Guarantee

Safety Precautions

Operator Training and Personal Safety

Familiarize operators, wear eye protection, dress appropriately, avoid moving parts, and protect against electric shock.

Workplace Safety and Operational Rules

Keep area clean, manage visitors, disconnect for maintenance, avoid cable abuse, and follow specific operational safety guidelines.

Warning Symbols

Electrical Connections

Parts Identification

Assembly

Fitting Transportation Wheels

Instructions and diagrams for attaching transportation wheels to the compressor using bolts, washers, and nuts.

Compressor Placement and Movement

Position on stable surface with ventilation, max 15° inclination. Move using handles/wheels, avoid fitting damage.

Preparing for Use

Pre-Connection Checks

Verify voltage, switch position, regulator setting. Drain condensate if unused.

Connecting Air Tools and Power

Attach air hose, ensure drain valve is tight, plug in, and switch on power.

Operating Instructions

Starting and Pressure Adjustment

Switch on, check safety valve, adjust pressure regulator by loosening and retightening locking ring.

Using the Pressure Regulator and Outlet Tap

Illustrates regulator settings, warns against exceeding pressure, and describes opening the outlet tap.

Shutting Down and Tool Removal

Switch off compressor, release hose pressure before disconnecting tools, and manage motor overload resets.

Draining the Reservoir

Essential before storage. Switch off, unplug, drain condensate using the valve, and retighten.

Routine Maintenance

Daily and Monthly Checks

Daily: Drain tank. Monthly: Inspect and clean air intake filter.

Six-Monthly Maintenance

Tighten bolts, clean external parts, examine non-return valve, and replace gasket/valve if needed.

Troubleshooting

Compressor Not Starting or Stopping

Troubleshoot bad connections, tripped overload, or motor issues. Check air receiver charge for starting problems.

Pressure and Overheating Issues

Address low pressure and overheating by checking compressor head gasket, valves, and sealing surfaces.

Specifications

Spare Parts and Service

Parts Diagram

Parts List

Declaration of Conformity