13
ASSEMBLY
Locating the air compressor
This compressor should be positioned on a
stable, flat surface (or one with a maximum
inclination of 15
O
). See figure 3, and ensure
that it is copletely stable.
Do not cover or box in the compressor.
Always position it with good all round
ventilation.
Moving the air compressor
Before moving the compressor, switch off and disconnect it from the mains
power supply.
• Always use the handle and wheels.
• Do not lift by (or put strain on) air taps, valves or hoses.
• Take care when moving the compressor to avoid damaging the valves or
fittings.
The compressor is heavy, take care when lifting and moving this compressor to
avoid personal injury. Get assistance if necessary.
Figure 3
To Next Page
Loading...
Need help?
General
