What to do if there is no sound from my Clas Ohlson 40-9565?
If there's no sound from your Clas Ohlson headphones, first ensure the volume switch isn't in the OFF position; if it is, turn it clockwise. Also, verify that the external audio source is playing. Finally, check that the audio cable is fully plugged in.
How to fix a blank display on Clas Ohlson 40-9565?
If nothing is shown on the display of your Clas Ohlson headphones, it could be due to the batteries being inserted incorrectly. Remove the batteries and re-insert them properly. Alternatively, the batteries might be flat, in which case you should replace them.
Step-by-step guide on how to correctly wear the ear defenders, including adjustments.
Identification and labeling of all buttons and display elements on the ear defenders.
Procedure for correctly inserting and replacing batteries in the device.
Instructions for setting the clock and time display on the ear defenders.
Guidance on listening to the radio, including manual tuning and presets.
How to adjust the audio volume using the integrated controls.
Instructions for connecting external audio devices via the AUX-IN port.
Recommendations for cleaning and maintaining the ear defenders.
Common problems and their solutions for the ear defender device.
Detailed technical data including radio frequency, weight, and dimensions.
Noise reduction data for the ear defenders at various frequencies.
Information regarding product compliance with relevant directives and standards.
General| Type | Over-ear |
|---|---|
| Connection | Wired |
| Cable Length | 1.2 m |
| Frequency Response | 20 Hz - 20 kHz |
| Driver Size | 40 mm |
| Color | Black |
| Impedance | 32 Ohm |
To Next Page
