Clas Ohlson UT377A - Choosing the Material; Material Selection Guide; Operation and Usage; Handling Protective Gear and Power

4 5
English
1. Take of theprotectivecap.
2. Remove theelectrode pin guard (2).
Placetheelectrode guard into theprotective
cap so it does not become misplaced.
Switching on/off
Hold in [ ] to switch themeter on/off.
Choosing thematerial
Press [ ] therequired number of times to select
thetype of wood to be measured.
Wood
Afrormosia 1
Brazilian walnut 1
Rhodesian teak 1
Walnut 2
Teak 2
Spruce 3
Oak 3
Birch 4
Larch 4
Pine 4
Removing theprotective cap and
electrode guard