Classe Audio CP-47.5 User Manual

OWNER’S MANUAL
CP-47.5
Remote Control
Balanced Line Pre-Amplifier
ENGLISH..........................................................................1
FRANÇAIS
......................................................................3
DEUTSCH
........................................................................6
ESPAÑOL
........................................................................8
NEDERLANDS
..........................................................11
ΕΛΛΗΝΙΚΑ
................................................................14
..............................................................................17
SPECIFICATIONS
........................................................20
V1.0

Classe Audio CP-47.5 Specifications

General

Number of Channels	2
Dimensions	17.5 x 3.5 x 14.5 inches
Weight	29 lbs
Frequency Response	20Hz - 20kHz
Total Harmonic Distortion	<0.002% (20Hz - 20kHz)
Signal-to-Noise Ratio	>100dB (A-weighted)

Summary

UNPACKING & SET-UP

Safety Feature

Explains the auto-muting circuit and safe power-on/off procedures to protect connected equipment.

A.C. LINE POWER

Details the unit's power switch and standby button for controlling power status and operation.

Installation of the Phono Board

Step-by-step guide to install the optional phono board module into the preamplifier.

OUTPUTS

Tape Output

Details the connection for the tape output jacks to a tape deck or recording device.

Line Level Outputs

Instructions on connecting line level interconnects to the RCA output jacks.

Balanced Outputs

Information on connecting to balanced outputs using XLR connectors and required equipment.

FRONT PANEL CONTROLS

Input Selector

Explains how to use the < and > buttons to navigate and select input sources on the unit.

Volume Control

Details the operation of the volume control knob and its available adjustment steps.

Mute

Describes the function of the MUTE button to temporarily set the volume to zero.

CP-47.5 SPECIFICATIONS