Need help?Do you have a question about the Classe Audio CP-700 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Output Impedance | 100 Ω |
| Inputs | 1 x XLR, 1 x RCA |
| Outputs | 1 x XLR, 1 x RCA |
| Total Harmonic Distortion | <0.005% |
| Signal-to-Noise Ratio | >100 dB |
| Input Impedance | 100 kΩ |
| Power Supply | 120V/60Hz or 240V/50Hz |
Introduction to the Classé family and guidance on initial setup, including unpacking and placement.
Details on preamplifier voltage requirements, warm-up, and break-in periods for optimal performance.
Highlights flexible GUI, customizable volume control, refined circuit design, and listening test methodologies.
Explanation of the preamplifier's front panel buttons and indicators, such as standby, menu, and volume knob.
Guide to rear panel inputs and outputs, including RCA, XLR, tape, RS-232, and CAN-Bus ports for system integration.
Details on remote control operation, including basic functions, navigation keys, and custom Fkey assignments.
Information on Classé's CAN-Bus for networked control, features, hardware setup, and model-specific functions.
Covers IR input/output, DC trigger inputs/outputs, ground terminal, and DC power input for system automation.
Comprehensive guide to the LCD touchscreen menu for operational settings, system setup, and customization.
Customizing inputs (name, balance, offset), phono gain, and managing volume and mute behavior.
Configuring screen brightness, timeout, language, colors, and adjusting the main audio balance.
Solutions for common problems like no sound, remote malfunctions, hum, and volume changes between inputs.
Instructions for cleaning the preamplifier cabinet and touchscreen, and replacing remote control batteries.
Detailed electrical, performance, and power specifications for the Classé CP-700 preamplifier.
Diagrams and measurements of the preamplifier and its power supply for physical integration.
To Next Page