15
3. Change the speed.
Move the speed/balance adjuster - the speed slows down when it moves left and speeds up when it moves right.
4. Change the volume
Hold down the metronome button, and the light begins to flash, move the speed/balance adjuster to change the volume.
● When power is on, the initial volume is set by the factory
● Before moving the adjuster, the volume is the last volume set.
Press the metronome button------the light turns off, the function stops
5. Stop setting the volume
Press the metronome button, the light turns on from flashing. The speed/balance adjuster is in the state of adjusting the
speed.
6. Stop the metronome function
Press the metronome button again and the light turns off.
7. In order to set the exact speed, you should go directly to input setting.
A. Hold down the metronome button and press the B5 (starting) button, the light flashes quickly.
B. Input the number
Input the speed number with the key from C6-A6
For example: press 1-C#6,3-D#6,4-E6 one by one, then it means the speed is 134
C. Stop the setting
Press the input key (B6), the setting stops, the light turns on, and the metronome works according to the speed set.
(13) CHANGING THE TOUCH SENSITIVITY
3 different touch sensitivity settings
Standard: Normal weight key action.
Light: Lighter touch – less effort to produce louder sounds.
Heavy: Heavier touch – more effort to produce louder sounds. Useful for practicing and developing finger strength and
agility.
To change the touch sensitivity.
A. Light Touch. Press the Light key -------the light turns on.
B. Heavy Touch. Press the Heavy key ----- the light turns on.
C. Standard Touch. Press the button of which the light is on – the light turns off.
Relation between light and heavy key touch
To Next Page
Loading...
