Classenti CDP1 - Transpose; Setting the Turning Curve; Adjust the Master Tuning

17
C. Stop the playback in the middle of a song
(15) TRANSPOSE
l. Transpose
Hold down the transpose button and press the F#4--F5 key, the light turns on after the transpose.
2. Back to “C” or standard key
Press the transpose button, the light turns off and the instrument returns to its original key.
(16) SETTING THE TUNING CURVE
With electronic pianos and synthesizers, you can modify the master tuning curve.
1. Set the tuning to 12 average tune.
Hold down the transpose button and press the organ button
2. Back to the tuning of piano
Hold down the transpose button and press the organ button
l While you press the button, the organ light indicates the content set
l The relation between the light and the tuning
Light (on) Tuning of piano
Light (off) 12 average tuning
● When the power is on ,it is the tuning of piano
(17) ADJUST THE MASTER TUNING