26 27
기본기능
Expert modeExpert mode
simultaneously
simultaneously
1 Beep
2 Beeps
1 Beep
2 Beeps
Deactivate the seat sensor override.
Select water pressure +/- simultaneously to enter automatic
pulsation wash setting mode.
Select and hold Rear wash for 3 seconds to initiate/cancel
automatic oscillation rear wash.
In the case of Child wash, Child pulsation wash is deactivated
rst instead of being activated as it is set basically.
20sec front wash → 20sec front oscillating wash → 20sec
front oscillating/pulsating wash.
Automatic pulsation wash on/o
Deactivate the seat sensor override.
Select nozzle position
◀
▶
simultaneously to enter automatic
oscillation wash setting mode.
Select and hold Rear wash for 3 seconds to initiate/cancel
automatic oscillation rear wash.
In the case of Child wash, Child oscillation wash is deactivated
rst instead of being activated as it is set basically.
20sec front wash → 20sec front oscillating wash → 20sec
front oscillating/pulsating wash
Automatic oscillation wash on/o
This feature can be set regardless seat sensor override.
Select Water temperature while Stop is selected and held to
initiate/cancel the automatic deodorize.
2 LEDs(green/red) of the energy saving blink with
1 beep when it is activated and only the red LED
blinks with 2 beeps when it is deactivated.
2 LEDs(green/red) of the energy saving blink with
1 beep when it is activated and only the red LED
blinks with 2 beeps when it is deactivated.
2 LEDs(green/red) of the energy saving blink with
1 beep when it is activated and only the red LED
blinks with 2 beeps when it is deactivated.
The yellow LED of the energy saving blinks with
1 beep when it is activated, and the red LED of
the energy saving blinks with 2 beeps when it is
deactivated.
The yellow LED of the energy saving blinks with
1 beep when it is activated, and the red LED of
the energy saving blinks with 2 beeps when it is
deactivated.
The yellow LED of the energy saving blinks with
1 beep when it is activated, and the red LED of
the energy saving blinks with 2 beeps when it is
deactivated.
Automatic deodorize on/o
Side arm
Side arm
Side arm
Side arm
ActivatingDeactivating
Remote
Remote
Remote
Remote
Yellow
Green
Red
Red Red Red
Silence mode on/o
Seat Sensor Bypsss
Deactivate the seat sensor override.
Select water pressure “-”while Stop is selected and
held to lower the volume of the beep sound.
The volume of the beep sound will be lowered after
getting out of Expert mode.
Regardless of the seat sensor override, the seat sensor
bypass can be set.
Select and hold Seat Temperature for a couple of
seconds to activate while Stop is selected. Repeat to
deactivate.
The yellow LED of the energy saving blinks with 1 beep
when it is activated, and the red LED of the energy
saving blinks with 2 beeps when it is deactivated.
During the seat sensor bypass activation, the auxiliary
touch panel does not work for safety.
3 seconds
1 Beep
2 Beeps
1 Beep
2 Beeps
Side arm
ActivatingDeactivating
Remote
Yellow
Green
Red
Red Red Red
1 Beep
2 Beeps
ActivatingDeactivating
Remote
Yellow
Red
2 LEDs(green/red) of the energy saving blink
with 1 beep when it is activated and only
the red LED blinks with 2 beeps when it is
deactivated.
The yellow LED of the energy saving blinks
with 1 beep when it is activated, and the red
LED of the energy saving blinks with 2 beeps
when it is deactivated.
Side arm
Remote
Water pressure / Nozzle position
/ Dry temperature change
Activate the seat sensor override
Basically, the water pressure and nozzle position are
stored and are maintained from the previous user's
settings, but these can be ignored and automatically
be changed to the presets as soon as the seat is
unoccupied.
Adjust the nozzle position and water pressure and
select and held Rear wash for 3 seconds.
Water pressure/Nozzle position of Front wash, Turbo
Wash and Child wash can be set by selecting and holding
each button for 3 seconds.
Adjust the dryer temperature and select and held Dry
for 3 seconds.
3 seconds
3 seconds
1 Beep
1 Beep
2 Beeps
2 Beeps
1 Beep
1 Beep
2 Beeps
2 Beeps
Side arm
Side arm
ActivatingActivating
DeactivatingDeactivating
Remote
Remote
Yellow
Yellow
Green
Green
Red
Red
Red
Red
Red
Red
Red
Red
※ For CT-7200, CT-7200R only
※ For CT-7200, CT-7200R only
To Next Page
Loading...
Need help?
General