Cleanfix E-Box 3.0 User Manual

MOUNTING THE CLEANFIX® E-BOX 3.0
WARNING MESSAGES
EN
17
4 Mounting the Cleanfix
®
E-Box 3.0
This chapter describes how to mount the Cleanfix® E-Box 3.0.
NOTE
An incorrect power supply may cause property damage!
The Cleanfix
®
E-Box 3.0 is available for vehicles with 12 V and 24 V power
supplies.
 Make sure that the unit is suitable for the existing voltage source.
High temperatures may cause property damage!
The temperature of the Cleanfix
®
E-Box 3.0 must not exceed 60°C / 140°F.
 Attach the unit at a heat-protected location.
Splashing water may cause property damage!
The Cleanfix
®
E-Box 3.0 can be damaged by splashing water that
penetrates through the filter.
 The unit must not be mounted with the filter facing downward.
Vibrations may cause property damage!
The Cleanfix® E-Box 3.0 can be damaged by strong vibrations.
 Attach the unit at a vibration-protected location.
 The orientation of the E-Box must be suitable for vibrations that occur.
 Max. 8.9 g / up to 400 Hz on the Z-axis
 Max. 4.5 g / up to 400 Hz on the X-axis and Y-axis
Overview:

Cleanfix E-Box 3.0 Specifications

General

Brand	Cleanfix
Model	E-Box 3.0
Category	Controller
Language	English