20
Connecting the Cleanfix
®
E-Box 3.0 with the pressure hose of the
Cleanfix
®
reversible fan
► Cut the pressure hose to a suitable length.
► Slide the hose clamp over the pressure hose.
► Slide the pressure hose over the hose fitting of the Cleanfix
®
E-Box.
► Secure the pressure hose by pinching the ears of the hose clamp with
pincers.
Installing the push button
► Determine the installation location for the push button in the vehicle
cab.
Push button installation location
If an unassigned OEM push button is available in the vehicle cab, this push
button can be used to save installation time.
If no unassigned OEM push buttons are available on the vehicle, the
supplied push button can be used.
To Next Page
Loading...
Need help?
General