22
Connecting the Cleanfix
®
E-Box 3.0 and push button to the vehicle’s
power supply
► Determine the power supply to which the Cleanfix
®
E-Box 3.0 and the
push button can be connected.
Power connection for the Cleanfix
®
E-Box 3.0 and push button
If a switched and fused circuit with a sufficient power supply (12 V : 20 A /
24 V : 15 A) is available in the vehicle, then this circuit can be used to save
installation time.
If a switched and fused circuit is not available in the vehicle, then the
supplied push-on connection with fuse can be used.
To Next Page
Loading...