Need help?Do you have a question about the Clear-Com IF4W4 and is the answer not in the manual?
Connecting Clear-Com to the interface via a shielded cable and XLR connector.
Detailed technical specifications including impedance, frequency response, and noise.
General| Channels | 4 |
|---|---|
| Number of Ports | 4 |
| Impedance | 600 Ohms |
| Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | > 90 dB |
| Frequency Range | 1.9 GHz |
| RF Output Power | 10 mW |
| Audio Inputs | 4 |
| Audio Outputs | 4 |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Connector Type | XLR |
To Next Page