User manual / Bedienungsanleit ung
6 © clearaudio electronic GmbH, 2018/ 12
2. Mounting the clamping ring
2.1 Selecting the correct tonearm base
If you would like to use the
TT5
in combination with swing base, please go ahead and mount of the
swing base as described in the user manual. The clamping ring is not needed in this case.
Whether you want to use the
TT5
with or without swing base, the following instructions (from point
4 onwards) for setting the
TT5
apply if for both options.
Before mounting the clamping ring, rst check that the correct tonearm base is mounted on your
turntable.
For Cleara udio Performance DC and Ovation turntables you can use the following tonearm bases.
• Uni concept / Performance DC / Ovation ( Art. No. AC031-5)
This t onearm base is equally suitable for mount ing all Clearaudio radial tonearms and
TT5
tangential tonearm without additional mounting of the clamping ring.
Please note: This tonearm base is not suitable to mount the swing base!
• Unify base ( Art. No. AC031-4)
For mou n t i n g t h e cl am p i n g r i n g or t he Cleara udio swing base.
Pic. 3: Unify base (Art. No. AC031-4)
Pic. 2: Uni concept / Performance DC / Ovation (Art. No. AC031-5)
To Next Page
Loading...