User manual / Bedienungsanleit ung
Made in Germany 7
Please tighten all three screws rmly (Pic. 6).
Pic. 5: Mount ing t he clamping ring Pic. 6: Fixing t he clamping ring
• To mount the clamping ring on a turntable in the Clearaudio Innovation series you will need
to mount the Unify 12 inch level base (Art. No. AC030-4).
2.2 Mounting the clamping ring
If the mounting of the clamping ring is necessary, please proceed as follows. Otherwise you can
proceed to point 3.
At t ach t he aluminium clamping ring t o t he clean sur face of t he t urnt able chassis using t he included
M4 x 10 hex socket head cap screws and the matching hex wrench (#3).
Make sure that the clamping ring sits perfectly at on the mounting surface.
Pic. 4: Unify 12 inch level base (Art. No. AC030-4)
To Next Page
Loading...