Need help?Do you have a question about the ClearOne CONVERGE Pro 2 (CP2) Series and is the answer not in the manual?
Details the system requirements and steps to install the CONSOLE AI application on your computer.
Guides on using the Project Audit feature to check a CONSOLE AI project for potential issues.
Step-by-step guide on how to create a new project for a CONVERGE Pro 2 device within CONSOLE AI.
Explains how to modify the device settings for a Huddle device, including network and username/password.
Provides instructions on making connections between Huddle audio channels using the FlowView interface.
Details on visualizing and making connections between Huddle audio channels using the MatrixView interface.
Explains how to modify the properties of a Mic channel for a Huddle device, including gain, AEC, and filters.
Guides on configuring filters, delay, compression, and gain for Processing Block channels in Huddle devices.
Details on modifying Output channel properties like polarity, EQ filter, and limiter for Huddle devices.
Instructions on how to add CONVERGE Pro 2 (CP2) devices to an existing project in CONSOLE AI.
Guides on adding a Beamforming Microphone Array 2 (BMA2) device to a CP2 project via P-Link connection.
Details on adding a BMA CT device to a CP2 project using a proprietary P-Link connection.
Instructions for adding a GPIO Expander device to a CP2 project.
Guides on adding a USB Expander device to a CP2 project.
Details on adding a DIALOG 20 Wireless Mic device to a CP2 project.
Explains how to change general settings for a CONVERGE Pro 2 device, including name and serial number.
Guides on modifying network settings for a CONVERGE Pro 2 device, including Ethernet and VoIP ports.
Instructions on connecting to a Huddle device to work in online mode, including direct IP connection.
Instructions on connecting to a CP2 device or stack to work in online mode.
Explains how to run macros, presets, timers, and change GPIO states when connected to a CP2 device.
Details on loading a project file to a CONVERGE Pro 2 device or stack for it to function.
Guides on committing project changes made in CONSOLE AI to connected CP2 devices.
Details on how to safely disconnect from a connected stack, including options for saving changes.
Details the system requirements and steps to install the CONSOLE AI application on your computer.
Guides on using the Project Audit feature to check a CONSOLE AI project for potential issues.
Step-by-step guide on how to create a new project for a CONVERGE Pro 2 device within CONSOLE AI.
Explains how to modify the device settings for a Huddle device, including network and username/password.
Provides instructions on making connections between Huddle audio channels using the FlowView interface.
Details on visualizing and making connections between Huddle audio channels using the MatrixView interface.
Explains how to modify the properties of a Mic channel for a Huddle device, including gain, AEC, and filters.
Guides on configuring filters, delay, compression, and gain for Processing Block channels in Huddle devices.
Details on modifying Output channel properties like polarity, EQ filter, and limiter for Huddle devices.
Instructions on how to add CONVERGE Pro 2 (CP2) devices to an existing project in CONSOLE AI.
Guides on adding a Beamforming Microphone Array 2 (BMA2) device to a CP2 project via P-Link connection.
Details on adding a BMA CT device to a CP2 project using a proprietary P-Link connection.
Instructions for adding a GPIO Expander device to a CP2 project.
Guides on adding a USB Expander device to a CP2 project.
Details on adding a DIALOG 20 Wireless Mic device to a CP2 project.
Explains how to change general settings for a CONVERGE Pro 2 device, including name and serial number.
Guides on modifying network settings for a CONVERGE Pro 2 device, including Ethernet and VoIP ports.
Instructions on connecting to a Huddle device to work in online mode, including direct IP connection.
Instructions on connecting to a CP2 device or stack to work in online mode.
Explains how to run macros, presets, timers, and change GPIO states when connected to a CP2 device.
Details on loading a project file to a CONVERGE Pro 2 device or stack for it to function.
Guides on committing project changes made in CONSOLE AI to connected CP2 devices.
Details on how to safely disconnect from a connected stack, including options for saving changes.
General| Brand | ClearOne |
|---|---|
| Model | CONVERGE Pro 2 (CP2) Series |
| Category | Conference System |
| Language | English |
To Next Page