Need help?Do you have a question about the ClearOne Converge Pro 840T and is the answer not in the manual?
Overview of the CONVERGE Pro audio conferencing solution and its revolutionary advances.
Lists common venues and scenarios where the CONVERGE Pro product family is used.
Lists the specific CONVERGE Pro products and associated products available.
Outlines the general advantages offered by each product in the CONVERGE Pro family.
Details the leading-edge features common to all CONVERGE Pro family products.
Describes specific advanced features and improvements in the CONVERGE Pro family.
Details the specific enhancements related to Acoustic Echo Cancellation technology.
Lists enhancements specific to the telephone hybrid functionality of these models.
Describes the Voice over Internet Protocol and SIP features of the VH20 unit.
Details the specific enhancements of the Beamforming Microphone Array.
Describes the features and benefits of the CONNECT CobraNet/Dante network bridges.
Details the features and benefits of the CONVERGE USB audio interface.
Crucial safety instructions and warnings to be read before using the product.
Detailed descriptions of individual CONVERGE Pro models and their features.
Information on how to contact ClearOne for technical assistance and support.
Details power, telephone, and environmental requirements for operating the devices.
Instructions and illustrations for verifying received components and inspecting for damage.
Diagrams and descriptions of front panel controls and back panel connectors for CONVERGE Pro units.
Explains the E-bus for connecting multiple CONVERGE units for powerful audio solutions.
Information on assigning unique identifiers to units linked via the E-bus for proper synchronization.
Guide to using front panel controls for simple configuration adjustments via the LCD.
How to adjust gain levels and mute channels using the LCD Channels Menu.
Procedure to configure serial port settings, Device IDs, and network settings via the LCD.
Instructions for running macros from the front panel LCD Macro Menu.
Guide on how to execute presets from the CONVERGE Pro front panel LCD Preset Menu.
Step-by-step instructions for installing the CONVERGE Console software on Windows.
Introduction to the CONVERGE Console software for configuring and controlling CONVERGE/CONVERGE Pro systems.
Explains how to store, create, open, and save configuration settings for CONVERGE Pro devices.
Details on how to establish a connection to a CONVERGE site via USB or IP.
Information on configuring site-specific settings, user access, and network parameters.
Guide to defining properties and configuring settings for individual CONVERGE/CONVERGE Pro units.
Explains Console modes (Configuration, Preset) and navigation through tabs and panes.
Details on configuring channel settings from input to processing to output.
Explains features like AEC, NC, Filters, AGC/ALC, and Mic Gating for audio signal shaping.
Overview of tabs like Matrix, Macro, Control, String, Event Scheduler, and Database.
Instructions for creating, executing, and managing presets within Console.
Explains the functions of File, View, Add, Connect, Modes, and Services menus.
Describes tools like Dialer, Phonebook, Label Editor, Device Log, Event Log, Web Builder, Debug Console.
Step-by-step guide on how to upgrade the firmware of CONVERGE units.
Overview of Debug Console tabs for monitoring, testing, and diagnostics.
Lists device types and their corresponding Device ID ranges for models.
Explains typographic conventions used for describing serial command syntax.
Details the structure and format of serial commands for device control.
Provides a table of channel ranges and group assignments for serial commands.
Details the default pin assignments for DB-25 Control/Status Ports A and B on various models.
Explains RS-232 port connections, including Telnet access and pinout details.
Guidelines for upgrading CONVERGE Console and unit firmware versions.
Steps to upgrade firmware from version 1.X to 4.X, including reboot requirements.
Steps to upgrade firmware from version 2.X to 4.X, including reboot requirements.
Steps to upgrade firmware from version 3.X to 4.X, including reboot requirements.
Procedure to update firmware for the Beamforming Microphone Array to ensure 4.X compatibility.
Detailed technical specifications for the CONVERGE Pro 880 unit.
Detailed technical specifications for the CONVERGE Pro 880T unit.
Detailed technical specifications for the CONVERGE Pro 880TA unit.
Detailed technical specifications for the CONVERGE Pro 8i unit.
Detailed technical specifications for the CONVERGE Pro TH20 unit.
Detailed technical specifications for the CONVERGE Pro VH20 unit.
Detailed technical specifications for the CONVERGE SR 1212 unit.
Detailed technical specifications for the CONVERGE SR 1212A unit.
Information on compliance with FCC and Industry Canada regulations for digital devices.
Details on compliance with FCC Part 68 requirements for telephone connections.
Information regarding Industry Canada certification and telecommunications network requirements.
Advisory regarding AC power, electrical surges, and lightning transients.
Details CE marking and conformity to EMC and Low Voltage Directives.
Information regarding New Zealand law for telephone conversation recording and privacy.
Specifies the DC resistance restriction for the PSTN line in Japan.
Overview of configuring the CONVERGE VH20 using configuration files via TFTP.
Describes the process of configuring a VH20 using configuration files and Console software.
Explains how the VH20 gets provisioning information from a TFTP server via DHCP by default.
Overview of the CONVERGE Pro audio conferencing solution and its revolutionary advances.
Lists common venues and scenarios where the CONVERGE Pro product family is used.
Lists the specific CONVERGE Pro products and associated products available.
Outlines the general advantages offered by each product in the CONVERGE Pro family.
Details the leading-edge features common to all CONVERGE Pro family products.
Describes specific advanced features and improvements in the CONVERGE Pro family.
Details the specific enhancements related to Acoustic Echo Cancellation technology.
Lists enhancements specific to the telephone hybrid functionality of these models.
Describes the Voice over Internet Protocol and SIP features of the VH20 unit.
Details the specific enhancements of the Beamforming Microphone Array.
Describes the features and benefits of the CONNECT CobraNet/Dante network bridges.
Details the features and benefits of the CONVERGE USB audio interface.
Crucial safety instructions and warnings to be read before using the product.
Detailed descriptions of individual CONVERGE Pro models and their features.
Information on how to contact ClearOne for technical assistance and support.
Details power, telephone, and environmental requirements for operating the devices.
Instructions and illustrations for verifying received components and inspecting for damage.
Diagrams and descriptions of front panel controls and back panel connectors for CONVERGE Pro units.
Explains the E-bus for connecting multiple CONVERGE units for powerful audio solutions.
Information on assigning unique identifiers to units linked via the E-bus for proper synchronization.
Guide to using front panel controls for simple configuration adjustments via the LCD.
How to adjust gain levels and mute channels using the LCD Channels Menu.
Procedure to configure serial port settings, Device IDs, and network settings via the LCD.
Instructions for running macros from the front panel LCD Macro Menu.
Guide on how to execute presets from the CONVERGE Pro front panel LCD Preset Menu.
Step-by-step instructions for installing the CONVERGE Console software on Windows.
Introduction to the CONVERGE Console software for configuring and controlling CONVERGE/CONVERGE Pro systems.
Explains how to store, create, open, and save configuration settings for CONVERGE Pro devices.
Details on how to establish a connection to a CONVERGE site via USB or IP.
Information on configuring site-specific settings, user access, and network parameters.
Guide to defining properties and configuring settings for individual CONVERGE/CONVERGE Pro units.
Explains Console modes (Configuration, Preset) and navigation through tabs and panes.
Details on configuring channel settings from input to processing to output.
Explains features like AEC, NC, Filters, AGC/ALC, and Mic Gating for audio signal shaping.
Overview of tabs like Matrix, Macro, Control, String, Event Scheduler, and Database.
Instructions for creating, executing, and managing presets within Console.
Explains the functions of File, View, Add, Connect, Modes, and Services menus.
Describes tools like Dialer, Phonebook, Label Editor, Device Log, Event Log, Web Builder, Debug Console.
Step-by-step guide on how to upgrade the firmware of CONVERGE units.
Overview of Debug Console tabs for monitoring, testing, and diagnostics.
Lists device types and their corresponding Device ID ranges for models.
Explains typographic conventions used for describing serial command syntax.
Details the structure and format of serial commands for device control.
Provides a table of channel ranges and group assignments for serial commands.
Details the default pin assignments for DB-25 Control/Status Ports A and B on various models.
Explains RS-232 port connections, including Telnet access and pinout details.
Guidelines for upgrading CONVERGE Console and unit firmware versions.
Steps to upgrade firmware from version 1.X to 4.X, including reboot requirements.
Steps to upgrade firmware from version 2.X to 4.X, including reboot requirements.
Steps to upgrade firmware from version 3.X to 4.X, including reboot requirements.
Procedure to update firmware for the Beamforming Microphone Array to ensure 4.X compatibility.
Detailed technical specifications for the CONVERGE Pro 880 unit.
Detailed technical specifications for the CONVERGE Pro 880T unit.
Detailed technical specifications for the CONVERGE Pro 880TA unit.
Detailed technical specifications for the CONVERGE Pro 8i unit.
Detailed technical specifications for the CONVERGE Pro TH20 unit.
Detailed technical specifications for the CONVERGE Pro VH20 unit.
Detailed technical specifications for the CONVERGE SR 1212 unit.
Detailed technical specifications for the CONVERGE SR 1212A unit.
Information on compliance with FCC and Industry Canada regulations for digital devices.
Details on compliance with FCC Part 68 requirements for telephone connections.
Information regarding Industry Canada certification and telecommunications network requirements.
Advisory regarding AC power, electrical surges, and lightning transients.
Details CE marking and conformity to EMC and Low Voltage Directives.
Information regarding New Zealand law for telephone conversation recording and privacy.
Specifies the DC resistance restriction for the PSTN line in Japan.
Overview of configuring the CONVERGE VH20 using configuration files via TFTP.
Describes the process of configuring a VH20 using configuration files and Console software.
Explains how the VH20 gets provisioning information from a TFTP server via DHCP by default.
General| RS-232 ports | 1 |
|---|---|
| Ethernet LAN (RJ-45) ports | 2 |
| Cancellation span | 130 ms |
| Echo cancellation | 12 dB |
| Signal-to-Noise Ratio (SNR) | 62 dB |
| Input voltage | 100 - 240 V |
| Input frequency | 50/60 Hz |
| Power consumption (typical) | 30 W |
| Operating temperature (T-T) | -10 - 50 °C |
Weight and Dimensions| Weight | 3.3375 g |
|---|---|
| Dimensions (WxDxH) | 438 x 260 x 45 mm |
To Next Page
