Cautions | warnings
CAUTION
WARNING
Before you Start
SCAN THE QR CODE
AND VIEW OUR VIDEO
DEMONSTRATING
FOR TECHNICAL SUPPORT CALL 03 8351 9933
6
Read through the fitting instructions before installation of Clearview Accessories.
Always install the accessory following the fitting instructions. Failure to do so may
cause damage to the vehicle or the accessory.
Ensure all recyclable discarded vehicle accessory components and packaging are
recycled following local recycling regulations.
Safely store and protect any removed vehicle components.
Remove all metal swarf and dust from all vehicle surfaces if the surface is used for
accessory installation.
Release the latch and push your slide in gently. If you’re slamming the slide in, it will
cause damage, resulting in the latches not working correctly, this may not be
covered by warranty.
The Assembly Guide
for the Easy Slide®
SCAN ME
Want to watch the video instead?
The Clearview Easy Slide® is designed to be installed internally within a canopy,
vehicle or trailer. Constant exposure to the elements can cause rust.
To Next Page
