ClearView Easy Slide - Assembly Instructions

Assembly Instructions
Place the Easy Slide® on the vehicle drawer system, positioned roughly in place.
Release the Easy Slide® Transit Lock by pushing the centered yellow lever towards the
right.
Free the fridge tray assembly for movement by simultaneously pressing down both
yellow levers on bearing runner, at the same time slide the tray assembly forward slightly
to reveal rear fixing holes on Easy Slide® base plate.
1.
2.
3.
clearviewaccessories.com.au
The Clearview Easy Slide® should only be mounted to a solid, fixed, flat
timber/metal surface. Do not attempt to fit the Easy Slide® to an existing
inbuilt fridge slide, warranty on the Easy Slide® will be void if attempted.
8
4. Using timber screws provided, temporarily fix the rear of the Easy Slide® to the top of
your drawers.
5. Once the Easy Slide® is secured, bring the tray assembly to full extension. An audible
“click” can be heard when rail lock out mechanism is engaged.
1
2
1
2
3
4a 4b
5