Need help?Do you have a question about the Cleaver-Brooks CBH 100 and is the answer not in the manual?
Details burner operation sequence for standardly equipped boilers with CB-20 flame safeguard.
Covers burner operation sequence for optionally equipped boilers with CB-40 flame safeguard.
Explains sequences and actions for pilot flame failure, no main flame, or loss of flame during operation.
Details inspection and setting of operating limit, high limit, and high-low fire controls for optimal performance.
Step-by-step guide for starting oil burners (Series 100 & 200), including preparation and initial firing.
Step-by-step guide for starting gas burners (Series 200 & 700), including preparation, pilot ignition, and main flame.
Describes normal operating modes, conditions for shutdown, and the shutdown sequence for all fuels.
Highlights importance of checking water level controls and vessel waterside to prevent major damage.
Provides detailed guidance on setting and adjusting pressure, temperature, and high-low fire controls.
Covers burner drawer inspection, diffuser positioning, nozzle cleaning, and oil pump adjustments.
Details pilot flame adjustment, gas pressure regulation, and combustion analysis for gas burners.
Covers the importance, installation, inspection, and testing of safety valves to prevent overpressure.
Covers troubleshooting for lack of spark, improper electrode settings, or failed ignition components.
Diagnoses issues where the pilot ignites but the main flame does not, concerning fuel supply or valve operation.
Troubleshoots sudden shutdowns during operation, checking fuel supply, flame detection, and interlocks.
General| Brand | Cleaver-Brooks |
|---|---|
| Model | CBH 100 |
| Category | Boiler |
| Language | English |
To Next Page
